钢结构配件
设为首页加入收藏 铝镁锰板
  • 网站首页
  • 企业简介
  • 产品展示
  • 产品应用
  • 新闻资讯
  • 在线订购
  • 客户留言
  • 招贤纳士
  • 联系我们
  • 钢结构厂房的性能
  • 钢结构的应用及其类别
  • 钢结构厂房的好处
  • 钢结构屋面的特点
当前位置:山东晟泰官方网站 >> 新闻资讯 >> 行业资讯 >> 浏览文章
行业资讯

桔皮花纹铝卷的制作必要达到的标准

标签:桔皮,花纹,制作,必要,达到,到的,标准 时间:2025年06月16日 阅读319次
(1)桔皮花纹铝卷幕墙以及铝合金构件要横平竖直,标高精确,外观不许可有机械损伤(如划伤、擦伤、压痕)生产流水线,也不许可有需处理的缺陷(如斑点、污迹、条纹等)。
(1) the aluminum roll curtain wall of orange peel and the aluminum alloy component should be vertical and vertical, and the elevation is correct. The surface is not allowed to have mechanical damage (such as scratching, scratching and indentation), and the defects (such as spots, stains, stripes, etc.) are not allowed.
(2)铝型材幕墙悉数外露金属件(压板),从任何角度看均应外表平整,不许可有任何小的变形、波纹、紧固件的凹进或凸起。
(2) all exposed metal parts (press plates) of the aluminum profile curtain wall should be smooth from any angle, and no small deformation, ripple, and the indented or protruding of the fasteners are allowed.

(3)牛腿铁件与T形槽固定后应焊接牢固,与主体结构混凝土接触面的间隙不得大于lmm,并用镀锌钢板塞实。牛腿铁件与幕墙的连接,必须垫好防震胶垫。施工现场焊接的钢件焊缝,应在现场涂二道防锈漆。

铝卷生产厂家

(3) the bracket should be firmly welded with T grooves. The clearance between the bracket and the main structural concrete shall not be more than LMM and be welded with galvanized steel sheet. The connection between the iron piece and the curtain wall must be cushions. Two welds of anticorrosive paint shall be applied to the welds of steel welds at the construction site.
(4)桔皮花纹铝卷在与砌体、抹面或混凝土外观接触的金属外观,必须涂刷沥青漆,厚度大于100um。
(4) the orange peel pattern aluminum coil must be painted with asphalt paint on the metal surface which is in contact with masonry, plastering or concrete surface. The thickness is more than 100um.
(5)玻璃安装时,其边缘与尤骨必须保持间隙,使上、下、左、右各边闲暇均有保证。同时,要防止污染玻璃,分外是镀膜一侧应尤加细致,以防止镀膜剥落形成花脸。安装好的玻璃外观应乎整,不得出现翘曲等征象。
(5) when the glass is installed, the edges and the bone must be kept open, so that the gaps on the upper, lower, left and right sides are guaranteed. At the same time, to prevent pollution of the glass, especially the side of the coating, you should pay attention to prevent the coating from flaking off to form a flower face. The surface of the installed glass should be whole and no warpage should be observed.
(6)橡胶条和胶条的嵌塞应密实、周全百度优化,两根橡胶条的接口处必须用密封胶添补严实。使用封缝胶密封时,应挤封饱满、均匀同等,表面应平整光滑
(6) the impaction of the rubber bar and the rubber strip should be dense and comprehensive. The interface between the two rubber strips must be filled with sealant. When sealant is used for sealing, it should be full and uniform. The appearance should be smooth and smooth.
以上的精彩内容由铝卷生产厂家进行保举阅读,想要知道更多有效的知识,迎接点击:http://www.esmo.cn/jndcly3564。
The above highlights are recommended by the manufacturers of aluminum rolls, and you want to know more useful knowledge. Welcome to click: http://www.esmo.cn/jndclyyxgs3564

河南人事考试中心
上一篇:要怎么预防铝镁锰板拖黑呢
下一篇:怎么选择铝镁锰板防滑的
相关:桔皮 花纹 制作 必要 达到 到的 标准
新闻资讯NEWS CENTER
  • 公司新闻
  • 行业资讯
相关文章RELATED
  • 制作合金铝镁锰板过程中细致什么
  • 购买花纹铝镁锰板细致一些事项
  • 购买花纹铝镁锰板细致的一些事项
  • 花纹铝镁锰板怎么洗刷更干净不伤
  • 制作铝镁锰板离不开哪些步骤?
  • 遴选花纹铝镁锰板应该细致什么?
  • 涂层铝镁锰板安装过程中必要细致
  • 怎么制作铝镁锰板拉丝的?
  • 选择花纹铝镁锰板必要细致哪些题
  • 花纹铝镁锰板常见的规格有哪些
联系我们CONTACT US
行业资讯 金属屋面材料兰陵晟泰钢构支架厂
联系人:安兆伟
手机:136-5539-8883
电话:0539-5200178
传真:0539-5210008
邮箱:sdstgf@163.com
地址:山东省临沂市兰陵县西环路与南环路交汇
(兰陵晟泰官方网站) 版权所有 2006-2018 保留所有权利 E-mail:lystgw@163.com