2. After using the measuring tools, wipe the surface stains and aluminum scraps and loosen the fastening devices. When the long term (1 months or more) is not used, the rust proof oil should be applied to the measuring surface. When measuring tools do not need to be put into the protective box, the best person can be used full-time, and do well in the annual inspection records of measuring instruments by authoritative units.
3。不要用油石、砂布擦磨量具外观及测量面和刻线部分,非计量检修人员,严禁拆卸、改装和擅自补缀量具。 3. Do not use grease or abrasive cloth to grind the surface of measuring tool and measuring surface and scribing line. Non metering maintenance personnel shall strictly dismantle, refit and repair gauges without authorization. 4。当工件外观有毛刺时,肯定要去净毛刺网络营销公司,再进行测量,否则会使量具磨损,并且还会影响测量效果的正确性。 4. When burr is present on the surface of the workpiece, the burr should be cleaned and measured. Otherwise, the measuring tool will wear out, and the accuracy of the measurement results will also be affected. 5。不要用手摸量具的测量面,由于手上有汗液等潮湿脏物会污染测量面活动策划,使它生锈。量具不要同其他工具、及金属物质混放在一路以免碰伤量具。 5. Do not touch the measuring surface with your hand, because sweat and other wet dirt on your hands will pollute the measuring surface and make it rusty. Measuring tools should not be mixed with other tools and metal materials to avoid damaging the measuring tools. 6。不准把卡尺的量爪尖端当作划针、圆规或其他工具使用,不准人为扭动两卡爪或把量具当卡板使 6. It is not allowed to use the tip of the caliper of the caliper as a needle, compasses or other tools. It is not allowed to artificially wriggle the two jaw claw or to use the gauge as a pallet. 迎接大家访问我们的铝镁锰板生产厂家http://www.esmo.cn/jndcly3564广州礼品公司,我们会把许多的精彩的内容赓续的呈现给大家. Welcome to visit our aluminum board manufacturer http://www.esmo.cn/jndcly3564, we will show you a lot of wonderful content.